Chemicals
-
Pigment Coating Material Iron Oxide Red H110/120/130/180/190 In Best Price
- CAS No.: 1332-37-2
- Appearance: Red powder
- EINECS: 215-570-8
- Type: Synthetic
- Solubility: Insolubility
- Composition: Oxide
- Density: 5.24
- Molecular Weight: 71.844
- Melting Point: 1565℃
- Boiling Point: 3414℃
- Dielectric Constant: 14.2℃
- HS code: 2821100000
- Specification: 325mesh
-
G313 Iron Oxide Yellow/ Pigment Yellow 42 for Pigment and Oil paint
- CAS No.: 51274-00-1
- Appearance: Yellow powder
- Model NO.: Pigment Yellow 42
- Type: Synthetic
- Solubility: Insolubility
- Composition: Oxide
- Density: 5.24
- Molecular Weight: 159.69
- Melting Point: 1538 ℃
- Flash Point: >230 ℉
- Water Solubility: 1.65μg/L
- RTECS: NO7400000
- Transport Package: III
- Specification: 325mesh
-
5A Molecular sieve for hydrogen production Alkali metal silicaluminate
- Particle size (mm): 2-3
- Bulk density (g/ml): ≥ 0.75
- Compressive strength (N): ≥40
- Static water adsorption (%, wt): ≥21
- Static nitrogen adsorption(%, wt): ≥11
- Static carbon monoxide adsorption (%, wt): ≥27
- Static n-hexane adsorption(%, wt): ≥14
- Package water content(%):≤ 1.5
- Particle conformance(%): ≥97
-
High Quantity Pre-Reformer Catalyst/Steam Reforming Catalyst For Production Of Synthesis Gas
- Appearance: Granules
- Particle size: ∮5×5mm
- Purity: 42%/50%, Nickel Content(Ni) ≥50%
- Minimum Order: Depends on your requirement
- Model NO.: Pre-reformer catalyst
- Carrier: Al2O3
- Bulk density: 1.0-1.1kg/L
- Chemical State: Reduced State and Stabilization
- HS Code: 3815900000
- Type: Steam Reforming Catalyst
-
Factory supply DME-1 Dimethyl ether catalyst for produce dimethyl ether
- Appearance: White or light yellow extrudate
- Chemical composition: Main components is Al203
- Size: Diameteo3~4mm ,long:3~20mm
- Bulk density: 0.45~0.50 kg/L
- Specific surface area: ≥250m2/g
- Average crushing strength: radial>80N/cm
- Abrasion: ≤5%
-
3A/4A/5A Molecular sieve used in Desiccant
- Silica-Alumina ratio: 2
- Diameter (mm): 3-5
- Static water adsorption (%, wt): ≥20
- Bulk density (g/ml): ≥ 0.70
- Compressive strength (N): ≥90
- Abrasion (%, wt): ≤ 0.20
- Loss on ignition (%,wt): ≤1.50
-
Factory supply Methanol synthesis catalyst granules improve the output of methanol plant
- Appearance: black cylinder
- Particle size: ∮5×(4-5)mm
- Minimum Order: Depends on your requirement
- Bulk density: 1.30-1.5kg/L
- Radial crushing strength: ≥180N/cm
- Surface area: 70-90m2/g
-
Best price MS Methanol synthesis catalyst used for low pressure methanol synthesis plant
- Appearance: black cylinder
- Particle size: Ф5×(4.5～5.5) mm
- Minimum Order: Depends on your requirement
- Bulk density: 1.35～1.5kg/L
- Radial crushing strength: ≥220N/cm
- Surface area: 80～100m2/g
-
Factory Supply Cesium Fluoroaluminate CsAlF4 Powder For CS Flux
- CAS No.: 138577-01-2
- Molecular Formula: CsAlF4
- Specification: Cs:53-62%,8-12μm
- Minimum Order: Depends on your requirement
- Packing: 25kg/Drum
- MW: 235.88100
- Density: 3.7 G/Ml at 25ºC(Lit.)
- Melting Point: 423-436ºC(Lit.)
- WGK: 3
- RIDADR: UN 1759
-
Best Price Manganese Gluconate Powder Used in Nutritional Fortifier
- CAS No.: 6485-39-8
- Molecular Formula: C12H22MnO14
- Specification: BP2015 USP40 EP9.0 FCC(IV) CP2005 GB15571-2010
- Minimum Order: Depends on your requirement
- Packing: 25kg/Bag, 25kg/Drum
- Shelf Life: 2 Years
- Formula Weight: 481.27
- Boiling Point: 673.6ºC at 760 MmHg
- Melting Point: 131℃ (DEC.)(Lit.)
- PSA: 254.90000
- EINECS: 229-350-4
- HS: 2918160000
-
Good Price C14H16N4 Hydroxypropyl Methylcellulose Phthalate
- CAS No.: 9050-31-1
- Molecular Formula: C14H16N4
- Specification: HP55/HP55S
- Minimum Order: Depends on your requirement
- Packing: 25kg/Bag
- MW: 240.304
- Density: 1.3±0.1 g/cm3
- Boiling Point: 456.7±48.0 °c at 760 Mmhg
- Melting Point: >145ºC (DEC.)(Lit.)
- Flash Point: 230.0±29.6 ℃
- WGK: 1
- RTECS: FJ5954000
- EINECS: 232-674-9
-
Low-Substituted Hydroxypropyl Cellulose Used as Disintegrant for Solid Dosage Forms
- CAS No.: 9004-64-2
- Molecular Formula: C36H70O19
- Minimum Order: Depends on your requirement
- Packing: 25kg/Bag
- MW: 806.930
- Density: 1.3±0.1 g/cm3
- Boiling Point: 891.2±65.0 ℃ at 760 Mmhg
- Flash Point: 492.8±34.3 ℃
- WGK: 1
- RTECS: NF9050000
- EINECS: 618-388-0